Kindly please follow ALL steps to make sure the glitch works. Also, please leave a comment about what you guys think about this glitch. 😁
1- Build a new car. This is not necesarry but RECOMMENDED.
2- Equip all performance parts except for ECU.
3- Save your car. Enter DYNO.
4- Max TURBO bars 4-9*. The number of bars will vary with the car chosen.
5- Run the DYNO.
6- Leave DYNO and go to Performance parts.
7- Equip Stage 1 Turbo.
8- Go to DYNO. Push down on the last two bars in Turbo.
9- Run the DYNO
10- Leave DYNO and go to Performance Parts
11- Equip Stage 3 Turbo
12- Go to DYNO, You will see a gold bar in the Turbo. Push it down just once. It will be in 7, 8, or 9
13- Push down the 4 Bar to fill up 5-9. In order to fill up four you push down 3-0 in that order. Keep doing it until 3-0 is empty.
14- Repeat steps 7,8 then repeat steps 12,13
*When Four gets maxed out, max out the 3 bar in the same process by pushing down 2-0
When 3 is maxed out or at least 3/4 of the way there. Stop and move to ECU glitch.
==ECU GLITCH==
1- Go to Performance Parts and go to ECU.
2- Manually install the first 4 parts-Dont buy the stages
3- Then skip performance chip, install the next one
4- Skip engine management, then install last one
5- Go to DYNO
6- In ECU, put first two bars all the way down. If they dont then you did not do the first part long enough.
7- Run DYNO
Leave DYNO and go to Performance parts
9- Install Perf. Chip then Engine Management<<must be in this order.
10- Go to DYNO-should be two gold bars on the first 2 bars.
0 komen:
Catat Ulasan